Loading
WATER EXPOSURE
Do not immerse in water
Our shoes should not be immersed in water as the glues and sealants can dissolve and the leather can become hard and brittle. If the buckles are exposed to salt water, carefully rinse them to avoid corrosion. If Birkenstocks become wet, allow them to dry slowly, away from direct heat. Our EVA collection is the only range that has been designed for use in and around water.
Cork-Care should be applied to prevent your Birkenstock Footbeds from drying out. When the cork no longer looks shiny, apply a thin coat of Cork-Care. Do not be alarmed by cracks which appear where the foot bends. This is an indication that the shoe is adapting to your walking pattern. These cracks are superficial and can be repaired.
Please inspect your cork footbeds regularly. If cracks appear apply cork sealant as described above. If the cork breaks down too far the only option is to replace the entire footbed including the EVA sole unit. This is called recycling.
Both the cork and the soles of your Birkenstocks can be damaged by exposure to concentrated heat. Do not leave your shoes in closed cars on warm days and keep them away from radiators and fireplaces. If your shoes become wet, allow them to dry slowly, away from direct heat.
The footbed is constructed of layers of jute and cork covered in a suede lining. The footbed is designed to absorb moisture from your feet. It is recommended to air your footbeds regularly to prevent a build up of odours which occur from excess moisture.
Many designs come with a removable footbed. If you wear these every day of the week, the footbeds will retain a lot of moisture. It is recommended to remove the footbeds regularly for airing. Replacement footbeds are available from your Birkenstock retailer giving you the option to alternate between pairs. Whenever you bring your shoes for repair please remember to leave the footbed in your shoes as this will aid in the speed and accuracy of the repair.