PageContent
Blundstone Size Guide
Blundstone Size Guide
Blundstone boots are sized in Australian sizing, which is the same as UK sizing.
Use the tables below to find your perfect fit.
Please note: Blundstone boots are unisex and sized in AU/UK sizing. If you're between sizes, we generally recommend sizing down as the leather upper will soften and mould to your foot with wear.
If you have a wider foot, consider sizing up half a size for extra comfort.
These guides have been supplied by Blundstones.
| AU / UK | US Men's | EU | MM (Foot Length) |
|---|---|---|---|
| 3 | 4 | 36 | 222 |
| 4 | 5 | 37 | 229 |
| 5 | 6 | 38 | 235 |
| 6 | 7 | 39 | 246 |
| 7 | 8 | 41 | 254 |
| 8 | 9 | 42 | 262 |
| 9 | 10 | 43 | 271 |
| 10 | 11 | 44 | 280 |
| 11 | 12 | 45 | 288 |
| 12 | 13 | 46 | 296 |
| 13 | 14 | 47 | 305 |
| 14 | 15 | 48 | 314 |
| AU / UK | US Women's | EU | MM (Foot Length) |
|---|---|---|---|
| 3 | 6 | 36 | 222 |
| 4 | 7 | 37 | 229 |
| 5 | 8 | 38 | 235 |
| 6 | 9 | 39 | 246 |
| 7 | 10 | 41 | 254 |
| 8 | 11 | 42 | 262 |
| 9 | 12 | 43 | 271 |
| 10 | 13 | 44 | 280 |
Fitting Tips
- Blundstone boots are pull-on style with elastic side panels they should feel snug at first and will soften and mould to your foot over time.
- There should be a small amount of heel slip when new (up to 6mm). This will reduce as the sole flexes and the boot breaks in it is not a sign the boot is too big.
- Your toes should not touch the front of the boot. Allow around 10–12mm of space at the toe for comfort and movement.
- If you are between sizes, we recommend sizing down as the leather upper will stretch slightly with wear.
- If you have a wider foot or high instep, consider sizing up for extra comfort.
- Blundstone boots are unisex, women usually go by the us womens sizing and not the AU/UK
Measuring Your Feet
Always measure your feet wearing socks unless the style is made to be worn with bare feet. Use your largest foot to take the measurement, and if unsure, measure both and use the larger measurement.
What you'll need: A ruler or tape measure, a pen and a blank piece of paper (A4 or larger)
Place the short end of the paper against a wall. Place your largest foot on the paper with your heel against the wall, so that your heel is equal with the edge of the paper.
Without moving your foot, use the pen to mark where your longest toe ends. Step off the paper.
Using your ruler or tape measure, measure from the edge of the paper to the line you have drawn. You can now use this measurement to determine your shoe size.